product datasheet 4635 boston lane phone: 512 - 382 - 8100 mktg - doc - 00 1 99 e 01 austin, tx 78735 www.nuventix.com revision aug 2012 r1 synjet ? z flow 90 outdoor cooler synjet c ooling technology provides the most reliable thermal management solution available. this led cooler has been developed by nuventix for outdoor modules and arrays . ? outdoor rated 1 ? reliable 100k hours lifetime ? energy efficient specifications 1 thermal & acoustic synjet setting 2 spl (dba) 3 wire connections high performance 28 red to +vdc black & blue to ground standard 22 red to +vdc black only to ground silent 1 8 red to +vdc black & purple to ground pwm at 100% duty cycle 28 red to +vdc black only to ground blue to pwm signal electrical synjet setting 2 voltage (vdc) +/ - 10% current (ma) 4 pavg (mw) voltage (vdc) +/ - 10% current (ma) 6 pavg (mw) imin iavg ipeak imin iavg ipeak high performance 5 20 120 240 600 12 10 67 134 800 standard 80 160 400 50 100 600 silent 60 120 300 40 80 480 pwm at 100% duty cycle 160 320 800 82 164 980 environmental all settings min max units conditions operating temperature - 40 70 c a ir temperature surrounding cooler storage temperature - 50 75 c air temperature surrounding cooler storage altitude 15k m above sea l evel operating relative humidity 5 95 % non - condensing weight 125 g synjet only reliability 100k hrs l10 @ 6 0 c , air temperature surrounding cooler regulatory compliance rohs , ul, fcc part 15 class b , ce 1 synjet design guidelines for outdoor use must be followed to meet rated lifetime specifications. 2 all values are typical at 25 o c unless otherwise stated. 3 the synjet has a time varying current. the current waveform is sinusoidal and the average current (iavg) is used to calculate the avera ge power consumption (pavg) at nominal input voltage (vdc). see the electrical section in the produ ct design guide for a detailed explanation. ? 5 yr warranty ? small form factor ? ip56
product datasheet 4635 boston lane phone: 512 - 382 - 8100 mktg - doc - 00 1 99 e 01 austin, tx 78735 www.nuventix.com revision aug 2012 r1 mechanical ? synjet cooler synjet wire harness connector pinout part numbers part number description notes NX200105 synjet, zflow 90, outdoor , level select, 5v , 600 mm wire harness hard wired performance settings nx200106 synjet , zflow 90, outdoor , pwm , 5v , 600 mm wire harness use with pwm input to control performance setting nx200107 synjet, zfl ow 90 , outdoor, level select, 12v , 600 mm wire harness hard wired performance settings nx200108 synjet , zfl ow 90 , outdoor, pwm , 12v , 600 mm wire harness use with pwm input to control performance setting pin wire color symbol description 1 red +vdc 5 v or 12 v depending on model 2 black gnd ground 3 purple ctrl2 input for level select model status signal for pwm model 4 blue ctrl1 input for level select model pwm input for pwm model nuventix reserves the right to make changes to the products or information contained herein without notice. no liability is assumed as a result of their use or applications . for additional information, please contact nuventix directly. important: synjet s should be completely wired to the power supply before the power supply is energized. the power supply should be turned off before the synjet cool er is disconnected. synjet coolers are not designed for ?hot swap? or ?hot plug? applications. all dimensions are nominal and in mm unless otherwise stated.
|
